
1. The principle of the relay
Relay is a kind of switching equipment that can transfer the switch signal of one circuit to another circuit. It is generally composed of three parts: electromagnetic system, electrostatic system and mechanical system. The electromagnetic suction force is generated through the coil to close or break the contact, so as to control the on and breaking or steering of the controlled object (such as electric light, power motor, etc.). When the voltage or current of the circuit reaches the specified value of the relay, the core in the coil generates a strong magnetic field, so that a high current or voltage output can be obtained at the contact on it, thus realizing the switching control of the circuit.
2. Drive circuit layout tips
1. The power supply coil shall be isolated from the relay coil
It is better to separate the power coil from the relay coil or put it in the isolation cover to prevent the high voltage or high current of the power coil from interfering or burning to the relay coil.
2. Contact method of the relay coil
When the relay coil is connected, the coil polarity should be followed, otherwise the coil will not work properly. Positive and reverse polarity shall be clearly marked at both ends of the coil.
3. Setting of the bypass capacitor
Relys tend to produce noise, especially in high frequency or high current environments. To avoid such interference, a bypass capacitor can be placed at either end of the relay coil to effectively reduce the noise interference.
4. Place the virtual contacts
The virtual contact can be distributed in the mechanical contact, reducing the impact force of the circuit, thus improving the life of the relay.
5. Impedance matching of the circuit board
The winding of the circuit board will cause the impedance mismatch of the circuit, such as inductance and capacitors, which will affect the switching performance of the relay. To ensure stability, appropriate impedance matching of all elements in the system.
6. Optical coupling and isolation
To avoid high voltage and high current transmission to the relay coil, the circuit can be isolated using an optical coupling isolator.
7. Correct discharge protection
When the relay is off, the electromagnetic field in the coil generates a reverse voltage, which may cause damage to other components. To avoid this, a reverse diode needs to be placed to make the reverse voltage transfer into the diode.
3. brief summary
Relay is an important electrical equipment and is widely used. When designing the circuit, we need to follow the principles of circuit stability, reliability, impedance matching, so as to ensure the safe operation of the relay. In addition, the correct placement of virtual contacts, bypass capacitor, optical coupling isolator, etc., can improve the life of the relay and optimize its performance. To sum up, the correct drive circuit layout skills play a key role in the normal operation and long-term stable operation of the relay.

QIANJI Relay, China's top relay supplier, engaged in foreign trade industry for more than 30 years, quality, service is guaranteed!
